Tire Size Conversion
285/70r17 to inches
285/70R17 has a nominal width of 285 mm and an estimated outside diameter of 32.71 inches. Actual tire dimensions vary by manufacturer and operating conditions.
Maintained by mmtoinches.im · Updated
NIST describes the standard inch as exactly equivalent to 25.4 mm
. NIST length definition. Michelin — reading tire markings. Method and limitations.
Nominal tire-size calculations for 285/70r17: section width, estimated sidewall height, outside diameter, circumference, and revolutions per mile. Actual dimensions vary by tire, rim, pressure, load, and wear.
Section width
285 mm
11.22 inches
Sidewall height
199.5 mm
7.85" (70% of width)
Wheel (rim) diameter
17"
431.8 mm
Overall diameter
32.71"
830.8 mm
Estimated circumference
102.76"
2610.0 mm
Estimated revolutions per mile/km
617 revs/mile
383 revs/km
About 285/70r17 tire size
The size 285/70r17 indicates a section width of 285 mm (11.22 inches), an aspect ratio of 70% (sidewall height 199.5 mm or 7.85 inches), and a 17-inch wheel. Estimated outside diameter calculates to 32.71 inches (830.8 mm), with an estimated geometric circumference of 102.76 inches.
Use these measurements to estimate speedometer error and clearance changes when switching sizes. For multi-size comparison and speed error calculation, try our dedicated tire size calculator.
Common tire sizes
Compare the nominal dimensions of 285/70r17 with other tire sizes. Confirm vehicle approval, rim compatibility, clearances, and load and speed ratings separately.
Sources and calculation notes
285/70R17 has a nominal width of 285 mm and an estimated outside diameter of 32.71 inches. Actual tire dimensions vary by manufacturer and operating conditions.
Method: Sidewall height in mm = width × aspect ratio / 100. Estimated diameter in mm = rim inches × 25.4 + 2 × sidewall height; circumference = π × diameter.
Scope: Actual inflated size and rolling circumference vary by product, load, pressure and wear. Fitment also requires clearance, rim width, load and speed checks.
Content maintained by mmtoinches.im. Updated and reference notes reviewed . How we calculate and present measurements. Sources support the stated definitions; examples and calculators are not certification of a product or compliance with a standard.