Tire Size Conversion
275/55r20 to inches
275/55R20 has a nominal width of 275 mm and an estimated outside diameter of 31.91 inches. Actual tire dimensions vary by manufacturer and operating conditions.
Maintained by mmtoinches.im · Updated
NIST describes the standard inch as exactly equivalent to 25.4 mm
. NIST length definition. Michelin — reading tire markings. Method and limitations.
Nominal tire-size calculations for 275/55r20: section width, estimated sidewall height, outside diameter, circumference, and revolutions per mile. Actual dimensions vary by tire, rim, pressure, load, and wear.
Section width
275 mm
10.83 inches
Sidewall height
151.3 mm
5.95" (55% of width)
Wheel (rim) diameter
20"
508.0 mm
Overall diameter
31.91"
810.5 mm
Estimated circumference
100.25"
2546.3 mm
Estimated revolutions per mile/km
632 revs/mile
393 revs/km
About 275/55r20 tire size
The size 275/55r20 indicates a section width of 275 mm (10.83 inches), an aspect ratio of 55% (sidewall height 151.3 mm or 5.95 inches), and a 20-inch wheel. Estimated outside diameter calculates to 31.91 inches (810.5 mm), with an estimated geometric circumference of 100.25 inches.
Use these measurements to estimate speedometer error and clearance changes when switching sizes. For multi-size comparison and speed error calculation, try our dedicated tire size calculator.
Common tire sizes
Compare the nominal dimensions of 275/55r20 with other tire sizes. Confirm vehicle approval, rim compatibility, clearances, and load and speed ratings separately.
Sources and calculation notes
275/55R20 has a nominal width of 275 mm and an estimated outside diameter of 31.91 inches. Actual tire dimensions vary by manufacturer and operating conditions.
Method: Sidewall height in mm = width × aspect ratio / 100. Estimated diameter in mm = rim inches × 25.4 + 2 × sidewall height; circumference = π × diameter.
Scope: Actual inflated size and rolling circumference vary by product, load, pressure and wear. Fitment also requires clearance, rim width, load and speed checks.
Content maintained by mmtoinches.im. Updated and reference notes reviewed . How we calculate and present measurements. Sources support the stated definitions; examples and calculators are not certification of a product or compliance with a standard.